Benefit of Glycerine on Surface Hardness of Hybrid & Nanofill Resin Composite
Downloads
Background: Composite resins restoration is a treatment for tooth structure loss due to pathological conditions. Longevity of composite resins restoration can be affected by surface hardness restoration. Glycerin can increase surface hardness restoration with inhibit bond oxygen and free radicals on polymerization composite resins. Purpose: Analyze the increase surface hardness composite resins restoration after glycerin application before light-curing composite resins. Review(s): Of the six journals included in this literature review, five journals reported significant differences because of the obstacles in the polymerization process of the composite resin when composite contact with light-curing will activate the photoinitiator to produce highly reactive free radicals, free radicals will break the double chain carbon bonds of monomers and form single bonds of free radicals with monomers. Bonding of free radicals with monomers will produce polymeric bonds (degree of conversion) which affects the level of surface hardness of the filling. While one journal noted no significant difference in the surface hardness of composite resin after glycerin application. Conclusion: The use of glycerin before light-curing can increase the surface hardness composite resin restorations.
Riskesdas K. Hasil Utama Riset Kesehata Dasar (RISKESDAS). J Phys A Math Theor [Internet]. 2018;1–220. Available from: http://arxiv.org/abs/1011.1669%0Ahttp://dx.doi.org/10.1088/1751-8113/44/8/085201%0Ahttp://stacks.iop.org/1751-8121/44/i=8/a=085201?key=crossref.abc74c979a75846b3de48a5587bf708f
Putong RDC, Wowor VNS, Wicaksono DA. Gambaran Karies. ejournal unsrat. 2013;1(2):1–9.
Tuncer D, Karaman E, Firat E. Does the temperature of beverages affect the surface roughness, hardness, and color stability of a composite resin? Eur J Dent. 2013;7(2):165–71.
Zhou X, Huang X, Li M, Peng X, Wang S, Zhou X, et al. Development and status of resin composite as dental restorative materials. J Appl Polym Sci. 2019;136(44):1–12.
Velo MM de AC, Coelho LVBF, Basting RT, Amaral FLB do, Franca FMG. Longevity of restorations in direct composite resin: literature review. RGO - Rev Gaúcha Odontol. 2016;64(3):320–6.
Sitanggang P, Tambunan E, Wuisan J. Uji Kekerasan Komposit Terhadap Rendaman Buah Jeruk Nipis (Citrus Aurantifolia). e-GIGI. 2015;3(1):1–5.
Ozcan S, Yikilgan I, Uctasli MB, Bala O, Kurklu ZGB. Comparison of time-dependent changes in the surface hardness of different composite resins. Eur J Dent. 2013;7(Supplement 1):S20–5.
Aryanto M, Armilia M, Aripin D. Compressive strength resin komposit hybrid post curing dengan light emitting diode menggunakan tiga ukuran lightbox yang berbeda. Dent J (Majalah Kedokt Gigi). 2013;46(2):101–6.
Annusavice KJ, Shen C, Rawls HR. Phillips' Science of Dental Material 12th Ed. 12th Ed. Missouri: Elsevier Saunders; 2013. 588 p.
Gladwin M, Bagby M. Clinical Aspects of Dental Materials 4th Ed [Internet]. Vol., Wolters Kluwer. 2013. vi–499. Available from: http://dx.doi.org/10.1016/j.jsames.2011.03.003%0Ahttps://doi.org/10.1016/j.gr.2017.08.001%0Ahttp://dx.doi.org/10.1016/j.precamres.2014.12.018%0Ahttp://dx.doi.org/10.1016/j.precamres.2011.08.005%0Ahttp://dx.doi.org/10.1080/00206814.2014.902757%0Ahttp://dx.
Soekartono RH, Yuliati A, Sani RM, Pratiwi DD. Sifat fisik permukaan resin komposit hybrid setelah direndam dalam minuman energi pH asam. J Mater Kedokt Gigi. 2014;3(1):8–17.
Sakaguchi RL, Powers JM. Craig's Restorative Dental Materials 13th Ed. 13th Ed. Sakaguchi RL, Powers JM, editors. Vol., Elsevier Mosby. United States: Elsevier Mosby; 2012. 412 p.
Sidiqa AN, Soerachman B, Putri MY. Evaluasi Nilai Kekerasan Resin Komposit Bulkfill dengan Variasi Waktu Penyinaran Sinar LED. J Mater Kedokt Gigi. 2018;7(2):6–10.
Razibi ND, Nahzi MYI, Puspitasari D. PERBANDINGAN JARAK PENYINARAN DAN KETEBALAN BAHAN TERHADAP KEKERASAN PERMUKAAN RESIN KOMPOSIT TIPE BULK FILL. Dentino (Jur Ked Gigi). 2017;2(2):211–4.
Budimulia B, Aryanto M. Pengaruh jarak penyinaran terhadap kebocoran mikro pada tumpatan resin bulkfill jenis flowable. J Kedokt Gigi. 2018;30(1):1–7.
Basri MHC, Erlita I, N MYI. Kekasaran Permukaan Resin Komposit Nanofiller Setelah Perendaman Alam Air Sungai Dan Air PDAM. Dentino J Kedokt Gigi. 2017;II(1):101–6.
Kafalia RF, Firdausy MD, Nurhapsari A. Pengaruh Jus Jeruk dan Minuman Berkarbonasi Terhadap Kekerasan Permukaan Resin Komposit. ODONTO Dent J. 2017;4(1):38–43.
Noviyani A, N. MYI, Puspitasari D. Perbandingan Jarak Penyinaran dan Ketebalan Bahan Terhadap Kuat Tarik Diametral Resin Komposit Tipe Bul. Dentin J Kedokt Gigi. 2018;II(1):68–72.
Oliveira ALBM de, Garcia PPNS, Santos PA dos, Campos JíDB. Surface Roughness and Hardness of a Composite Resin: Influence of Finishing and Polishing and Immersion Methods Ana. Mater Res. 2010;13(3):409–15.
Zakiyah D, Effendy R, Edhie Arif. The Effect of Glycerin on the Surface Hardness and Roughness of Nanofill Composite. Conserv Dent J. 2018;8(2):46–53.
Chan KHS, Mai Y, Kim H, Tong KCT, Ng D, Hsiao JCM. Review: Resin composite filling. Materials (Basel). 2010;3(2):1228–43.
Permana DP, Sujatmiko B, Yulianti R. Perbandingan tingkat kebocoran mikro resin komposit bulk-filldengan teknik penumpatan oblique incremental dan bulk. Maj Kedokt Gigi Indones. 2016;2(3):135.
Park H-H, Lee I-B. Effect of Glycerin on the Surface Hardness of Composites After Curing. J Korean Acad Conserv Dent. 2011;36(6):483–9.
Bijelic-Donova J, Garoushi S, Lassila LVJ, Vallittu PK. Oxygen inhibition layer of composite resins: Effects of layer thickness and surface layer treatment on the interlayer bond strength. Eur J Oral Sci. 2015;123(1):53–60.
Ouchi H, Tsujimoto A, Nojiri K, Hirai K, Takamizawa T, Barkmeier WW, et al. Effect of oxygen inhibition layer of universal adhesives on enamel bond fatigue durability and interfacial characteristics with different etching modes. Oper Dent. 2017;42(6):636–45.
Strnad G, Kovacs M, Andras E, Beresescu L. Effect of Curing, Finishing and Polishing Techniques on Microhardness of Composite Restorative Materials. Procedia Technol. 2015;19:233–8.
Charan R. Applications , Characteristics and Information of Glycerin. 2013;3(3):1–3.
Becker LC. Safety Assessment of Glycerin as Used in Cosmetics. Int J Toxicol. 2014;
Handayani TM, Nugroho R, Hidayati L, Fatmawati DWA, Sumono A. Effects of glycerin application on the hardness of nanofilled composite immersed in tamarind soft drinks. Dent J (Majalah Kedokt Gigi). 2019;52(2):95–9.
Kharisma PN, Nugroho R, Budiharjo R. Pengaruh Aplikasi Gliserin pada Kekerasan Resin Komposit Nanofiller dengan Perendaman Cuka Apel. e-Journal Pustaka Kesehat. 2020;8(2):87–92.
Marigo L, Nocca G, Fiorenzano G, Callí C, Castagnola R, Cordaro M, et al. Influences of Different Air-Inhibition Coatings on Monomer Release, Microhardness, and Color Stability of Two Composite Materials. Biomed Res Int. 2019;2019.
CDJ by Unair is licensed under a Creative Commons Attribution 4.0 International License.
1. The journal allows the author to hold the copyright of the article without restrictions.
2. The journal allows the author(s) to retain publishing rights without restrictions
