Synthesis and Characterization of Nickel-Based Superalloy Materials for Manufacturing Aircraft Turbine Blades

Rezza Ruzuqi; Drs. Djony Izak Rudyardjo, M.Si.; Andi Hamim Zaidan, S.Si., M.Si., Ph.D.

doi:10.20473/iapl.v2i2.31557

Authors

Rezza Ruzuqi Department of Physics, Faculty of Science and Technology, Universitas Airlangga, Indonesia
Drs. Djony Izak Rudyardjo, M.Si.
djony-i-r@fst.unair.ac.id
Department of Physics, Faculty of Science and Technology, Universitas Airlangga, Indonesia
Andi Hamim Zaidan, S.Si., M.Si., Ph.D. Department of Physics, Faculty of Science and Technology, Universitas Airlangga, Indonesia

Vol. 2 No. 2 (2021): December

Articles

December 2, 2021

Downloads

PDF

Abstract
How to Cite
Metrics
References
License

The research has been conducted to manufacture nickel-based Superalloy materials. The purpose of this research was to find out the effects of variation of nickel composition on physical and mechanical properties of the Superalloy materials and find out the appropriate composition of Superalloy materials as materials for turbine blades. This research used nickel, cobalt, chromium, molybdenum, aluminium, and titanium commercial. The results showed that with more addition of nickel composition, the density and hardness values increased. This research showed that nickel-based Superalloy material 59 wt% was better applied as materials for turbine blades. It is also supported by the results of the test microstructure, where the structure of the sample morphology is more delicate and denser and contains smaller pores. Based on the XRD test results are also shown in the sample has been formed Superalloys phase.

Ruzuqi, R., Rudyardjo, M.Si., D. D. I., & Zaidan, S.Si., M.Si., Ph.D., A. H. (2021). Synthesis and Characterization of Nickel-Based Superalloy Materials for Manufacturing Aircraft Turbine Blades. Indonesian Applied Physics Letters, 2(2), 49–55. https://doi.org/10.20473/iapl.v2i2.31557

Download Citation

Benini, Gianluigi Alberto and Ernesto. "Performance of a Turboshaft Engine for Helicopter Applications Operating at Variable Shaft Speed." Gtindia2012-9505, 2012: 1.

"Airplane Turbofan Engine Operation and Malfunctions Basic Familiarization for Flight Crews." 5. 2014.

Andrei, Cristian. Helicopter Propulsion System. Bucharest: Cristian Andrei, 2012. Applied Thermodynamics Turbojet Engine. 2014.

Thomas. "Materials development in aero gas turbines." Bradford: R.J. Smith, G.J. Lewis, and D.H. Yates, 2000.

THE TURBOFAN ENGINE. 4 17, 2012.

"China Aeronautical Materials Handbook Edit Committee (Ed)." In China Aeronautical Materials Handbook, vol 2, 2nd ed, 399-418. Beijing: China Standard Press, 2002.

Bowman, Randy. TMS Meeting Page. http://www.tms.org/meetings/specialty/superalloys2000/superalloyshistory.html. 2000. (accessed Maret 15, 2015).

Utomo, Ghanie Ripandi. NIKEL. February 9, 2011. http://bilangapax.blogspot.sg/2011/02/nikel-dan-paduannya.html (accessed Juli 20, 2014).

Prasetyo, Yudi. yudi prasetyo53. Juni 30, 2012. https://yudiprasetyo53.wordpress.com/2012/06/30/pemilihan-material-tahanpanas/ (accessed Maret 15, 2015).

R.J. Smith, G.J. Lewis, and D.H. Yates. "Development and application of nickel alloys in aerospace engineering." 138. 2001.

Jones, Michael F. Ashby and David R. H. An Introduction to Properties, Applications, and Design, Fourth Edition. London: Elsevier Ltd, 2012.

Callister, W.D. Material Science and Engineering. New York: An Introduction, John Willey and Sons Inc, 1985.

A.G. Padalko, G.S. Yur'ev, G.I. Zubarev, V.I. Tsarev, and G.V. Talanova. "Synchrotron X-ray Diffraction Analysis of a Cast Nickel Alloy after Barothermal Action." Pleiades Publishing, Ltd, 2011: 1058-1063.

Saryanto, Hendi. Fathul Ilmi. September 9, 2013. http://fathul ilmi.blogspot.com/2013/09/teori-dasar-x-ray-diffraction-xrd.html (accessed Agustus 15, 2014).