TISSUE ENGINEERING IN MAXILLOFACIAL BONE RECONSTRUCTION
Downloads
Maxillofacial bone defects due to tumor resection, trauma or infections should be reconstructed to maintain the bone continuity in order to preserve its masticatory, speech and esthetic functions. Autogenous bone graft have been the gold standard for mandibular defects reconstruction, however, it is associated with limitation in volume and availability as well as the donor site morbidities. Tissue engineering approach has been proved to be a good alternative to overcome the limitation of autogenous bone graft. Tissue engineering studies have been conducted combining various sources of mesenchymal stem cell, scaffolds, and or signaling molecules. The paper aims to provide information on the development of bone tissue engineering researches to reconstruct bone defects through results of numerous studies obtained in the English literature. As the conclusion, bone tissue engineering is a potential approach to reconstruct maxillofacial bone defects.
Keywords: scaffold,osteoconduction, mesenchymal stem cell, bone regeneration, bone integrationArrington, E.D., Smith, W.J., Chambers, H.G., Bucknell, A.L. and Davino, N.A. complications of Iliac CrestBone Graft Harvesting. Clinical Orthopaedics and Related Research, 1996, 329: 300-09.http://dx.doi.org/10.1097/00003086-199608000-00037
Conrad C, Huss R. Adult stem cell lines in regenerative medicine and reconstructive surgery. J Surg Res 2005;124(2):201-8.
Eslaminejad MB, Bagheri F. Tissue Engineering Approach for Reconstructing Bone Defects Using Mesenchymal Stem Cells. Yakhteh Med J., 2009, 11(3): 263-272.
Fassina L, Saino E, De Angelis MG, Magenes G, Benazzo F, Visai L. (2010). Low-Power Ultrasounds as a Tool to Culture Human Osteoblasts inside Cancellous Hydroxyapatite. BioinorgChem Appl. 2010: 456240.
He Y, Zhang ZY, Zhu HG, Qiu WL, Jiang XQ, Wei Guo.Experimental study on reconstruction of segmental mandible defects using tissue engineered bone combined bone marrow stromal cells with three-dimensional tricalcium phosphate. The J Craniofac Surg.2007, 18(4):800-5
Heary, R.F., Schlenk, R.P., Sacchieri, T.A., Barone, D. and Brotea, C. Persistent Iliac Crest Donor Site Pain:Independent Outcome Assessment. Neurosurgery, 2002,50: 510-516.
Jafarian M, Eslaminejad MB, Khojasteh A, Mashhadi Abbas F, Dehghan MM, Hassanizadeh R Marrow-derived mesenchymal stem cells-directed bone regeneration in the dog mandible: a comparison between biphasic calcium phosphate and natural bone mineral. Oral Surg Oral Med Oral Pathol Oral RadiolEndod.2008. 105: e14-e24.
Kamadjaja, DB, Purwati, Ferdiansyah, Rantam FA. Healing Mechanism and Osteogenic Capacity of Bovine Bone Mineral— Human Amniotic Mesenchymal Stem Celland Autogenous Bone Graft in Critical Size Mandibular Defect. J. Biomedical Science and Engineering, 2015, 8: 733-746. http://dx.doi.org/10.4236/ jbise.2015.810070
Kuznetsov SA, Huang KE, Marshall GW, Robey PG, Mankani MH. Long-term stable canine mandibular augmentation using autologous bone marrow stromal cells and hydroxyapatite/tricalcium phosphate. Biomaterials 29 (2008): 4211–4216
Langer R, Vacanti JP. Tissue engineering. Science 1993;260:920-6.
Li Z, Li B. Repair of mandible defect with tissue engineering in rabbits. ANZ J. Surg. 2008. 75: 1017-1021
Patil AS, Merchant Y, Nagarajan P. Tissue engineering of craniofacial tissues – A review. J Regen Med Tissue Eng 2013;2:6.
Purwati A, Ferdiansyah, M. Nasronudin, FA Rantam. Stem cell exploration. Methods of isolation and culture. Airlangga University Press, 2009
Quarto R, Kutepov SM, Kon E (2001). Repair of large bone defects with the use of autologous bone marrow stromal cells. N Eng J Med; 344:385-386
Rai R, Raval R, Khandeparker RVS, Chidrawar SK, Khan AA,Ganpat MS. Tissue Engineering: Step Ahead in Maxillofacial Reconstructiion. Journal of International Oral Health 2015;7(9):138-142
Roberts R, Gallagher J, Spooncer E, Allen TD, Bloomfield F, Dexter TM. Heparansulphate bound growth factors: A mechanism for stromal cell mediated haemopoiesis. Nature 1988;332(6162):376-8.
Schnaper HW, Kleinman HK. Regulation of cell function by extracellular matrix. PediatrNephrol 1993;7(1):96-104.
Srisuwan T, Tilkorn DJ, Wilson JL, Morrison WA, Messer HM, Thompson EW, et al. Molecular aspects of tissue engineering in the dental field. Periodontol 2000;41:88-108.
Susarla SM, Swanson E, Gordon CR. Craniomaxillofacial reconstruction using allotransplantation and tissue engineering: Challenges, opportunities, and potential synergy. Ann PlastSurg 2011;67(6):655-61.
Ward BB, Brown SE, Krebsbach PH. Bioengineering strategies for regeneration of craniofacial bone: A review of emerging technologies. Oral Dis 2010;16(8):709-16.
Yuan J, Cui L, Zhang WJ, Liu W, Cao YL. (2007). Repair of canine mandibular bone defects with bone marrow stromal cells and porous beta tricalcium phosphate. Biomaterials. 28:1005-1013
1. As an author you (or your employer or institution) may do the following:
- make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use;
- make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g. via an e-mail list or list server);
- present the article at a meeting or conference and to distribute copies of the article to the delegates attending such meeting;
- for your employer, if the article is a ‘work for hire’, made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g. training);
- retain patent and trademark rights and rights to any process, procedure, or article of manufacture described in the article;
- include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially);
- use the article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of the article in the journal); and prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal;
- may reproduce or authorize others to reproduce the article, material extracted from the article, or derivative works for the author’s personal use or for company use, provided that the source and the copyright notice are indicated, the copies are not used in any way that implies JSCRTE endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
All copies, print or electronic, or other use of the paper or article must include the appropriate bibliographic citation for the article’s publication in the journal.
2. Requests from third parties
Although authors are permitted to re-use all or portions of the article in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use. Requests for all uses not included above, including the authorization of third parties to reproduce or otherwise use all or part of the article (including figures and tables), should be referred to JSCRTE by going to our website at http://e-journal.unair.ac.id/index.php/JSCRTE
3. Author Online Use
- Personal Servers. Authors and/or their employers shall have the right to post the accepted version of articles pre-print version of the article, or revised personal version of the final text of the article (to reflect changes made in the peer review and editing process) on their own personal servers or the servers of their institutions or employers without permission from JSCRTE, provided that the posted version includes a prominently displayed JSCRTE copyright notice and, when published, a full citation to the original publication, including a link to the article abstract in the journal homepage. Authors shall not post the final, published versions of their papers;
- Classroom or Internal Training Use. An author is expressly permitted to post any portion of the accepted version of his/her own articles on the author’s personal web site or the servers of the author’s institution or company in connection with the author’s teaching, training, or work responsibilities, provided that the appropriate copyright, credit, and reuse notices appear prominently with the posted material. Examples of permitted uses are lecture materials, course packs, e-reserves, conference presentations, or in-house training courses;
- Electronic Preprints. Before submitting an article to an JSCRTE, authors frequently post their manuscripts to their own web site, their employer’s site, or to another server that invites constructive comment from colleagues. Upon submission of an article to JSCRTE, an author is required to transfer copyright in the article to JSCRTE, and the author must update any previously posted version of the article with a prominently displayed JSCRTE copyright notice. Upon publication of an article by the JSCRTE, the author must replace any previously posted electronic versions of the article with either (1) the full citation to the work with a Digital Object Identifier (DOI) or link to the article abstract in JSCRTE homepage, or (2) the accepted version only (not the final, published version), including the JSCRTE copyright notice and full citation, with a link to the final, published article in journal homepage.
4. Articles in Press (AiP) service
JSCRTE may choose to publish an abstract or portions of the paper before we publish it in the journal. Please contact our Production department immediately if you do not want us to make any such prior publication for any reason, including disclosure of a patentable invention.
5. Author/Employer Rights
If you are employed and prepared the article on a subject within the scope of your employment, the copyright in the article belongs to your employer as a work-for-hire. In that case, JSCRTE assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.
6. JSCRTE Copyright Ownership
It is the formal policy of JSCRTE to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of the JSCRTE, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others. JSCRTE distributes its technical publications throughout the world and does so by various means such as hard copy, microfiche, microfilm, and electronic media. It also abstracts and may translate its publications, and articles contained therein, for inclusion in various compendiums, collective works, databases and similar publications
Every accepted manuscript should be accompanied by "Copyright Transfer Agreement" prior to the article publication.
