Risk Management in Work Activities at Ammonia Plant Fertilizer Production Industry
Downloads
Introduction: PT X is one of the companies in fertilizer production industry. There are two high-risk activities that endanger the safety and health of workers, namely supervision of welding and oil level checking in ammonia plant field of PT X. The purpose of this research was to apply risk management to the activities. Method: This research was a descriptive study which was carried out in observation using a cross sectional design. Variables in this study included hazard identification, basic risk analysis, risk control that has been done, existing risk analysis, and risk reduction assessment. The tools used for the data collection were observation sheets, interview guide sheets, and Job Safety Analysis sheets. Data that has been obtained through observation and interviews was processed using Fine (1971) semi quantitative technique. Results: The results of hazard identification were known to have as many as 6 potential hazards. The assessment results in the basic risk analysis showed that the initial risk level consisted of 3 risks with very high level, 2 risks with a substantial level and 1 risk with priority 3 level. After the risk control effort was applied, the results of the assessment in the existing risk analysis showed that the level of risk has decreased significantly. Conclusion: The value of risk reduction of each potential hazard results decreases by 95%, 88.89%, 85%, 93.33%, 66.67%, and 75%.
Keywords: ammonia plant, fertilizer production industry, risk management
Anindyta, A., Julianto, E. and Nugroho, A. (2017) ‘Analisis Risiko Kebocoran Gas pada Sistem Perpipaan Recycle Gas Hydrofinishing Plant dengan Menggunakan Metode Quantitative Risk Analysis ( QRA ) ( Studi Kasus : Perusahaan Produksi Pelumas )', Proceeding 1st Conference on Safety Engineering and Its Application, 1, pp. 346–352.
Apriani, M., Rizeki, A. and Nugroho, A. (2016) ‘Analisis Risiko Kegagalan dan Basic Cause Kebocoran pada Tangki Penyimpanan Amonia', Jurnal Purifikasi, 16(2), pp. 102–110.
Ayu, R. and Oginawati, K. (2016) ‘Analisis Potensi Ledakan dan Kebakaran Primary Reformer sebagai Unit Proses Produksi Amonia di PT. X', Jurnal Rekayasa Kimia dan Lingkungan, 11(2), pp. 72–81.
Bantani, A. S. Al, Herlina, L. and Mariawati, A. S. (2015) ‘Identifikasi Potensi Bahaya Dengan Menggunakan Metode Job Safety Analysis (JSA) (Studi Kasus di PT XYZ)'.
Chitragar, P. R., V, S. K. and N, K. G. (2016) ‘Use of Hydrogen in Internal Combustion Engines: A Comprehensive Study', Journal of Mechanicall Engineering and Biomechanics, 1(3), pp. 84–96.
Erdhianto, Y. (2017) ‘Analisis Keselamatan dan Kesehatan Kerja pada Departemen Service PT. Mega Daya Motor Mazda Jatim dengan Metode 5 Whys Dan SCAT', Jurnal IPTEK, 21(1), pp. 1–10.
Firmansyah, D. D., Khambali and Koerniasari (2020) ‘Analisis Risiko Pajanan Gas Ammonia (NH3) pada Pekerja Pabrik Ammonia I PT. Petrokimia Gresik', GEMA Lingkungan Kesehatan, 18(1), pp. 1–6.
Karuniawati, E. Y., Kurniawan, B. and Denny, H. M. (2018) ‘Analisis Kejadian Kebakaran dengan Metode "Loss Causation Model” pada Ssebuah Pabrik Kayu Lapis di Pacitan', Jurnal Kesehatan Masyarakat (e-Journal), 6(4), pp. 286–291.
Mardyaningsih, M. and Leki, A. (2015) ‘Jurnal teknik mesin.', Jurnal Teknik Mesin, 1(1), pp. 1–8.
Martino, P., Rinawati, D. I. and Rumita, R. (2015) ‘Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Job Safety Analysis (JSA) Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (HIRARC) di PT. Charoen Pokphand Indonesia- Semarang', 4(2).
Ministry of Health (2015) Situasi Kesehatan Kerja, Data Center and Information Ministry of Health Republic of Indonesia.
Nurmianto, E., Anita, N. and Aulia, A. N. (2018) ‘Identifikasi Hazard dan Perancangan Sistem Informasi Keselamatan dan Kesehatan Kerja di Unit Amoniak (Studi Kasus : PT. Petrokimia Gresik)', MATRIK (Jurnal Manajemen dan Teknik), 8(2), p. 112. doi: 10.30587/matrik.v8i2.377.
Olson, K. . (2017) Poisoning and Drug Overdose. Seventh Ed. McGraw-Hill Education.
Putri, D. S. (2016) ‘HIRA pada Pekerja Welding dan Grinding Bengkel Lambung Utara di PT. DOK dan Perkapalan Surabaya (PERSERO)', Jurnal Penelitian Kesehatan, 14(4), pp. 215–220.
Ramli, S. (2010) Sistem Manajemen Keselamatan & Kesehatan Kerja. Jakarta: PT. Dian Rakyat.
Rindika, D. K. F., Anindita, G. and Mayangsari, N. E. (2018) ‘Identifikasi Bahaya Menggunakan ETBA dan Penentuan Probabilitas dengan FTA pada Unit Ammonia', Proceeding 2nd Conference On Safety Engineering, 2, pp. 743–748.
Rizka Pisceliya, D. M. and Mindayani, S. (2018) ‘Analisis Kecelakaan Kerja Pada Pekerja Pengelasan di CV. Cahaya Tiga Putri', Jurnal Riset Hesti Medan Akper Kesdam I/BB Medan, 3(1), p. 66.
Salamah, U. and Adriyani, R. (2018) ‘Analisis Risiko Kesehatan Pekerja di Rumah Pemotongan Hewan Akibat Pajanan Gas Amonia', Jurnal Kesehatan Lingkungan, 10(1), pp. 25–35.
Sari, A., Subekti, A. and Mayangsari, N. E. (2018) ‘Identifikasi Potensi Bahaya Menggunakan Metode HAZOP pada Unit Hydrogen Plant', Proceeding 2nd Conference On Safety Engineering, (2581), pp. 623–628.
Statistics Indonesia (2016) Profil Statistik Kesehatan 2016. Jakarta.
Suciati, E., Nugroho, A. and Novitrie, N. A. (no date) ‘Analisis Risiko Ledakan dan Kebakaran pada Primary Reformer di Perusahaan Penghasil Pupuk', Proceeding 2nd Conference On Safety Engineering, (2581), pp. 681–684.
Tualeka, A. R. (2015) Analisis Risiko: Risk Assesment, Risk Management & Risk Communication di Lingkungan Kerja. Surabaya: Graha Ilmu Mulia.
Wicaksono, R. Y. (2017) ‘Risk Management Keselamatan dan Kesehatan Kerja pada Engine Room Kapal Feri Selat Madura II Surabaya', JPH Recode, 1(1), pp. 39–47.
Widyanto, S. A. and Suprihanto, A. (2017) ‘Identifikasi Zona Bahaya Kebakaran pada Unit Electrochlorination Plant (ECP) PLTU Rembang', Jurnal Teknik Energi, 13(1), pp. 19–24.
Wulandari, D. and Widajati, N. (2017) ‘Risk Assessment pada Pekerja Pengelasan Perkapalan dengan Pendekatan Job Safety Analysis', The Indonesian Journal of Occupational Safety and Health, 6(1), pp. 1–15.
In order to be accepted and published by The Indonesian Journal of Occupational Safety and Health, Author(s) who submit an article should complete all the review process. The copyright of received articles assigned to the The Indonesian Journal of Occupational Safety and Health and Department of Safety and Health, Universitas Airlangga as publishers of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
The Editorial Team of The Indonesian Journal Of Occupational Safety and Health and Department of Safety and Health strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Users of this website will be licensed to use materials from this website following the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. No fees charged. Please use the materials accordingly.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Attribution ” You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial ” You may not use the material for commercial purposes.
ShareAlike ” If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
How to Submit Articles in OJS
