Differences in the Physical Workload of Technicians and Managers in the Maintenance and Repair Division
Downloads
Introduction: PT. PAL Indonesia (Persero) is a state-owned company in the shipping industry. For running the production cycle, PT. PAL Indonesia (Persero) has several divisions. One of them is the Maintenance and Repair Division. This division involves workers with positions as technicians and managers who have different tasks and functions. These differences will result in unequal physical workloads. The purpose of this study is to analyze the differences in the physical workload of technicians and managers of the Maintenance and Repair Division of PT. PAL Indonesia (Persero). Methods: This study used an analytic observational method with a cross sectional design. The independent variable used in this research was the position of workers consisting of managers and technician staff. Meanwhile, the dependent variable was a physical workload. The research respondents were 24 technicians and 6 managers. Data were obtained through questionnaires and calorimeters to measure calorie needs. Results: The technicians were aged 20 - 33 years old (62.5%), and the managers were aged 48 - 61 years (83.3%). Technicians' nutritional status was categorized as normal, as many as 21 people and the nutritional status of managers was overweight, as many as 4 people. The physical workload of technicians was in the medium category, as many as 22 people and 5 managers had a moderate physical workload. Conclusion: There was no difference in the physical workload of technicians and managers of the Maintenance and Repair Division. This is because PT. PAL Indonesia (Persero) has implemented cooperation in job completion.
Abadini, D. and Wuryaningsih, C. E. (2018) ‘Determinan Aktivitas Fisik Orang Dewasa Pekerja Kantoran di Jakarta Tahun 2018', Jurnal Promosi Kesehatan Indonesia, 14(1), pp. 15–28.
Ajitia N., M. G. and Prasetya, A. (2017) ‘Efektivitas Manpower Planning Dengan Menggunakan Metode Analisis Beban Kerja (Work Load Analysis) Berdasarkan Pendekatan Full Time Equivalent (Studi Pada Divisi Pengembangan Karir, Organisasi, dan Kompetensi di PT. Pupuk Kalimantan Timur Tbk. Bontang, Ka', Jurnal Administrasi Bisnis S1 Universitas Brawijaya, 42(1), pp. 27–35.
Andiani, I. P. (2018) ‘Hubungan Antara Beban Kerja Dan Asupan Kalori Dengan Kelelahan Kerja pada Tenaga Kerja Bongkar Muat di Pelabuhan Samudera Bitung', Jurnal Kesmas, 7(4), pp. 1–8.
Arfani, Y. B. and Damayanti, R. (2019) ‘Factors of Subjective Work Fatigue on Service Workers Docking Pt Pal Indonesia (Persero)', Journal of Industrial Hygiene and Occupational Health, 4(1), pp. 13–26.
Ariani, N. L. and Masluhiya, S. (2017) ‘Keterkaitan Aktivitas Fisik Dengan Indeks Massa Tubuh (IMT) Siswa SD Kota Malang', Care : Jurnal Ilmiah Ilmu Kesehatan, 5(3), pp. 457–464.
Bandono, R. B. I. et al. (2014) ‘Analisis Beban Kerja Dan Jabatan Berdasarkan Job Description dan Factor Evaluation System pada Personel Dislambair Koarmada II', Jurnal Analisis Sistem & Riset Operasi, 1(4), pp. 33–42.
Daft, R. L. (2012) Management. 11th edn. South Western, USA: Cangange Learning.
Dassler, G. (2006) Manajemen Sumber Daya Manusia. 10th edn. Jakarta: PT. Indeks Putri Media.
DuBrin, A. J. (2012) Essentials of Management. 9th edn. South Western, USA: Cangage Learning.
Fahmy, A., Rosydah, B. M. and Amrullah, H. N. (2018) ‘Analisis Beban Kerja Dengan Metode Full Time Equivalent Untuk Mengoptimalkan Kinerja Pada Teknisi Maintenance Rtg', Seminar K3, 2(1), pp. 503–506.
Government of the Republic of Indonesia (2003) Undang - Undang Republik Indonesia No 13 Tahun 2003 tentang Ketenagakerjaan.
Harmawan, T. A. (2016) ‘Efek Penuaan Terhadap Ketahanan Otot Tangan pada Masyarakat Laki-laki Dewasa di Sragen', in Seminar Nasional Fisika dan Aplikasinya.
Hashiguci, N. (2020) ‘Practical Judgment of Workload Based on Physical', Sensors, 20(2786), pp. 1–19.
Irawati, R. (2017) ‘Analisis Pengaruh Beban Kerja Terhadap Kinerja Operator pada PT. Giken Precision Indonesia', Jurnal Inovasi dan Bisnis, 5(1), pp. 53–58.
Ita, C. and Mawaddah, S. (2019) ‘Analisis Pengukuran Beban Kerja Supervisor Dan Fireman PT Perta Arun Gas Menggunakan Metode Defence Research Agency Workload Scale', Industrial Engeneering Journal, 8(2), pp. 47–52.
Kusgiyanto, W. (2017) ‘Analisis Hubungan Beban Kerja Fisik, Masa Kerja, Usia, dan Jenis Kelamin Terhadap Tingkat Kelelahan Kerja pada Pekerja Bagian Pembuatan Kulit Lumpia di Kelurahan Kranggan Kecamatan Semarang Tengah', Jurnal Kesehatan Masyarakat, 5(5), pp. 413–423.
Larasati, S. (2019) ‘Hubungan Karakteristik Individu, Beban Kerja Fisik dan Beban Kerja Mental dengan Kelelahan Kerja Pada Karyawan Bagian Produksi Di PT. X', Jurnal Kesehatan Masyarakat, 7(4), pp. 601–608.
Maharja, R. (2015) ‘Analisis Tingkat Kelelahan Kerja Berdasarkan Beban Kerja Fisik Perawat di Instalasi Rawat Inap RSU Haji Surabaya', The Indonesian Journal of Occuptional Safety and Health, 4(1), pp. 93–102.
Mänttäri, S. K. et al. (2019) ‘Activity Level and Body Mass Index as Predictors of Physical Workload During Working Career', Safety and Health at Work, 10(4), pp. 527–530.
Maretno, A. (2015) ‘Analysis Physical and Mental Workload Uses Work Sampling and NASA-TLX To Decide Operator Number', Dinamika Rekayasa, 11(2), pp. 54–62.
Ministry of Health of the Republic of Indonesia (2019) Peraturan Menteri Kesehatan Republik Indonesia Nomor 28 Tahun 2019 Tentang Angka Kecukupan Gizi Yang Dianjurkan Untuk Masyarakat Indonesia. Jakarta: Ministry of Health of the Republic of Indonesia.
Ministry of Manpower and Transmigration (2011) Peraturan Menteri Tenaga Kerja dan Transmigrasi Nomor 13 Tahun 2011 tentang Nilai Ambang Batas Faktor Fisika dan Faktor Kimia di Tempat Kerja. Jakarta: Ministry of Manpower and Transmigration.
Pandelaki, M. T. (2018) ‘Pengaruh Teamwork dan Budaya Kerja Terhadap Kinerja Karyawan Yayasan Titian Budi Luhur Di Kabupaten Parigi Moutong', Katalogis, 6(5), pp. 35–46.
Rosento (2018) ‘Efektivitas Rekrutmen Dalam Kinerja Karyawan Pada Bagian Pemasaran di CV Ikra Cendana Lintang Jakarta', Jurnal Cakrawala, XVIII(1), pp. 81–88.
Rosmalina, Y. and Permaesih, D. (2014) ‘Aktifitas Fisik dan Penggunaan Energi Pekerja Laki-Laki dengan Jenis Pekerjaan Berbeda', Gizi Indonesia, 31(2), pp. 98–106.
Setiani, B. (2013) ‘Kajian Sumber Daya Manusia dalam Proses Rekrutmen Tenaga Kerja di Perusahaan', Jurnal Ilmiah Widya, 1(1), pp. 38–44.
Suma'mur (2014) Higiene Perusahaan dan Kesehatan Kerja (HIPERKES). Jakarta: Sagung Seto.
Syafei, M. Y. and Primanintyo, B. (2016) ‘Pengukuran Beban Kerja Pada Managerial Level Dan Supervisory Level Dengan Menggunakan Metode Defence Research Agency Workload Scale (DRAWS) (Studi Kasus Di Departemen UHT PT. Ultrajaya Milk Industry & Trading Co, TBk)', Jurnal Rekayasa Sistem Industri, 5(2), pp. 69–78.
Syahfudin, A. J. (2019) ‘Gambaran Faktor Internal dan Faktor Eksternal Kelelahan di Perusahaan Peleburan Baja Sidoarjo', The Indonesian Journal of Occupational Safety and Health, 8(3), pp. 336–345.
Syukron Ginanjar, M., Indarto and Santoso, D. (2019) ‘Determinan Kinerja Pegawai Dengan Motivasi Sebagai Variabel Intervening', Jurnal Riset Ekonomi dan Bisnis, 12(2), pp. 135–144.
Tarwaka (2004) Ergonomi Untuk Keselamatan, Kesehatan Kerja dan Produktivitas. 1st edn. Surakarta: UNIBA PRESS.
Tarwaka (2010) Ergonomi Industri: Dasar - Dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja. Solo: Harapan Press.
Tarwaka (2013) Ergonomi Industri. Surakarta: Harapan Press.
Vanchapo, A. R. (2020) Beban Kerja dan Stres Kerja. 1st edn. Edited by N. Arsalan. Pasuruan: CV. Penerbit Qiara Media.
Wati, D. A. (2018) ‘Hubungan Rentang Lengan Dengan Tinggi Badan Dalam Menentukan Indeks Massa Tubuh Lansia', Journal of Hiositic and Health Sciences, 2(1), pp. 14–18.
Wibowo, P. and Mustofa (2018) ‘Effect Of Work Conflict, Work Load, And Work Environment On Employees Work Stress (Case Study At Pt Indoraya Internasional Di Yogyakarta)', eCoBuss, 1(1), pp. 28–36.
Wijaya, C. and Rifa'i, M. (2016) Dasar-Dasar Manajemen. 1st edn. Medan: Perdana Publishing.
Wulandari, A. R., Widari, D. and Muniroh, L. (2019) ‘Correlation between Energy Intake, Job Stress, Phyisical Activity, and Sleep Duration with BMI in Middle Manage', Amerta Nutrition, 3(1), pp. 40–45.
Yunitasari, A. R., Sinaga, T. and Nurdiani, R. (2019) ‘Nutritient Intake, Physical Activity, Nutrition Knowledge, Nutritional Status, and Physical Fitness of Elementary School Sport Teacher, Media Gizi Indonesia, 14(2), p. 197.
Zakaria, T. (2019) ‘Peranan Staf Dalam Menunjang Pelaksanaan Tugas Pimpinan', Jurnal Lingkar Widyaiswara, 6(04), pp. 51–55.
Copyright (c) 2022 The Indonesian Journal Of Occupational Safety and Health
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
In order to be accepted and published by The Indonesian Journal of Occupational Safety and Health, Author(s) who submit an article should complete all the review process. The copyright of received articles assigned to the The Indonesian Journal of Occupational Safety and Health and Department of Safety and Health, Universitas Airlangga as publishers of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
The Editorial Team of The Indonesian Journal Of Occupational Safety and Health and Department of Safety and Health strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Users of this website will be licensed to use materials from this website following the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. No fees charged. Please use the materials accordingly.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Attribution ” You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial ” You may not use the material for commercial purposes.
ShareAlike ” If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.