RISK ASSESSMENT PADA PEKERJAAN MENEBANG KAYU DI HUTAN PRODUKSI (STUDI KASUS PADA PENGOPERASIAN CHAINSAW PERUM PERHUTANI KPH MADIUN)
Downloads
Logging the forest production is a high risk work. The condition of the forest acreage is difficult, the imbalance between the tools used by condition of the field and the skills of workers can lead to accidents. One of supporting job in the process of logging the forest production is the operation of the chainsaw that has hazards and risks which must be controlled. The main objective of this research was to risk assessment in the operational of the chainsaw in the work to cutting down trees in Perhutani KPH Madiun. This research was an observational research that conducted using cross sectional design and descriptive analysis. Data were used primary data based on interviews, observations and secondary data collected from the company. This research performed based on work activities of operating chainsaw. The result showed that based on idetification of hazards in activities of operating chainsaw in cutting trees, there were18 hazards Risk assessment showed that from 18 pure risks, there were 4 low risks,7 medium risks and 7 high risks. The conclusion from this research is the risk most dominant obtained from the risk assessment is high risk and risks while each one had the amount of 7 danger or 39 % of all the potential here hazards, to at a job should not be continued, work that needs to be set repeated or attempts to control at work to reduce the risk. Control must be reviewed for conformity before work began.
Keywords: cut timber, identification hazards, risk assessment
Australian/New Zealand Standard AS/NZS 4360:1999. Risk Assesment. Standards Association of Australia.
ASEAN OSHNET Occupational Safety and Health Network (Jejaring Kerja di bidang Keselamatan dan Kesehatan Kerja antara Negara-Negara ASEAN), 2004; dapat di simak di situs web http:// www.asean-osh.net
Gani, S. 1992. Ketenagakerjaan dan Keselamatan Kerja. Fakultas Kehutanan Institut Pertanian Bogor. IPB Press, Bogor.
Matangaran, J.R. 2007. Pengetahuan tentang Chainsaw (Prinsip Kerja dan Pengoperasian). Bogor: Fakultas Kehutanan IPB.
OHSAS 18001: 2007. Occupational Health and Safety Assessment Series.
Pradipta, R. A. 2015. Risk Management Keselamatan dan Kesehatan Kerja K3 pada Unit Penebangan Kayu di Hutan Produksi (Studi pada Pekerjaan Pengopeasian Chainsaw Perum Perhutani KPH Madiun). Skripsi. Fakultas Kesehatan Masyarakat, Universitas Airlangga.
Ramli, S. 2010. Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management. Cetakan Pertama. Dian Rakyat. Jakarta.
Suparto, R.S. 1999. Pemanenan Kayu. IPB Press. Bogor
Strehlke, B.F. 1991. Management in Indonesia: employment, working conditions and occupational safety. Availableat.http://www.fao.org/docrep/ u8520e/u8520e06.htm (Sitasi 13 November 2015).
Staaf, K.A.G., N.A. Wiksten. 1984. Tree Harvesting Techniques. Martinus Nijhoff/Dr.W. Junk Publishers. Dordrecht, The Netherlands.
Suhartana, S., Yuniawati. 2011. Tingkat Pemahaman Keselamatan dan Kesehatan Kerja pada Kegiatan Pemanenan Kayu Jati di KPH Cianjur.Jurnal Penelitian Hasil Hutan, Volume 29 No. 1, Halaman 46–56.
In order to be accepted and published by The Indonesian Journal of Occupational Safety and Health, Author(s) who submit an article should complete all the review process. The copyright of received articles assigned to the The Indonesian Journal of Occupational Safety and Health and Department of Safety and Health, Universitas Airlangga as publishers of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
The Editorial Team of The Indonesian Journal Of Occupational Safety and Health and Department of Safety and Health strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Users of this website will be licensed to use materials from this website following the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. No fees charged. Please use the materials accordingly.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Attribution ” You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial ” You may not use the material for commercial purposes.
ShareAlike ” If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
How to Submit Articles in OJS
