ANALISIS SISTEM PENGENDALIAN BAHAYA CONVEYOR BELERANG DI PELABUHAN PT. PETROKIMIA GRESIK

Dewangga Aji Saputra

= http://dx.doi.org/10.20473/ijosh.v7i3.2018.368-377
Abstract views = 619 times | downloads = 1469 times

Abstract


A technical and administrative control effort should be undertaken to prevent or reduce the impact of workplace accidents. Workplace accidents can be caused by unsafe human behavior and unsafe working environment conditions. This study has a general purpose for analyzing the sulfur conveyor hazard control system in PT Petrokimia Gresik. This research is observational, where as according to the way of data taking and timing of data retrieval is included in cross sectional study. The object of this research is the concession hazard control system of PT Petrokimia Gresik. In this research, I use descriptive analysis technique. The data used in this study is the primary data obtained from observations and interviews and secondary data obtained from corporate documents. The time of this research was conducted on April 20, 2015 until May 20, 2015. The result of the analysis on sulfur conveyor hazard control system in general is good. Lockout and tag out already have the tools and procedures but in its application still less and need to be improved. Emergency stop and emergency pull cord have less than 25% damage thus can be categorized well. To safeguard the fire hazard is properly installed and has good physical condition. For conveyor safety is in accordance with the standard nf en standards 294. For safety signs should be added. Administrative control measures are well implemented. Companies are advised to improve safety control efforts as there are still some need to be upgraded to either category.

Keywords: analysis, control, conveyor, hazard


Full Text:

PDF

References


Hidayatullah, A., 2013. Analisis Penerapan Sistem Lockout/Tag out (LOTO) pada Bagian Operasi dan Pemeliharaan di PT. X Tanjung Emas Kota Semarang. Jurnal Kesehatan Masyarakat Universitas DIponegoro, [e-Jurnal] 2 (1)

Keputusan Menteri Pekerjaan Umum Republik Indonesia Nomor 02/KPTS/1985 Tentang Ketentuan Pencegahan dan Penanggulangan Kebakaran pada Bangunan Gedung. Jakarta: Kementerian Pekerjaan Umum

Martinetti, A., Leo A.M. Van Dongen., Raffaele, R., 2016. A Back-Analysis on Conveyor Belt Injury for a Better Design for Maintenance Operations. American Journal of Applied Sciences, [e-Journal] 14 (1): pp. 1–12

OSHA., 2013. General industry and Construction. United State: Departemen of Labor United State

Peraturan Menteri Tenaga Kerja No. 02/MEN/1983 Tentang Instalasi Kebakaran Automatik. Jakarta: Kementerian Tenaga Kerja

Peraturan Menteri Tenaga Kerja No. 05/MEN/1985 Tentang Pesawat Angkat dan Angkut. Jakarta: Kementerian Tenaga Kerja

Peraturan Menteri Tenaga Kerja Republik Indonesia No. 04/MEN/1987 Tentang Panitia Pembina Keselamatan dan Kesehatan Kerja Serta Tata Cara Penunjukan Ahli Keselamatan Kerja. Jakarta: Kementerian Tenaga Kerja

Undang-Undang Nomor 1 Tahun 1970 Tentang Keselamatan Kerja. Jakarta: Kementerian Tenaga Kerja

Undang-Undang Nomor 13 Tahun 2003 tentang Ketenagakerjaan. Jakarta: Kementerian Tenaga Kerja

Vezina, G., 2003. A User’s Guide to Conveyor Belt Safety. Bibliothèque nationale du Québec: ISBN 2-550-42283-X


Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 The Indonesian Journal of Occupational Safety and Health

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

View IJOSH Stats  

In collaboration with:

Asosiasi Hiperkes dan Keselamatan Kerja Indonesia (AHKKI) Wilayah Jawa Timur 

MoU dengan AHKKI


Perhimpunan Ahli Kesehatan Kerja Indonesia  (PAKKI) Pusat

MoU dengan PAKKI

This Journal is Indexed By: