REDUCING HOSPITAL OUTPATIENT WAITING TIME USING LEAN SIX SIGMA: A SYSTEMATIC REVIEW
Background: Lean Six Sigma (LSS) is a beneficial data-driven tool for quality improvement. Literature regarding the use of LSS to reduce hospital outpatient waiting time is scarce despite numerous problems encountered in many countries.
Aims: This systematic review aims to evaluate the causes of long outpatient waiting time, demonstrate the effectiveness of LSS and the improvement strategies applied to reduce outpatient waiting time.
Methods: Literature search was performed on eight databases: Proquest, Wiley, Science Direct, Taylor and Francis, Oxford Journal, Sage Publication, Scopus, and Pubmed. Inclusion criteria were peer-reviewed English articles published from January 1, 2003, to May 25, 2021, and studies conducted in hospital settings.
Results: Nine relevant articles were included. Inefficient clinic processes, inappropriate scheduling, human resources problems, workplace factors, patient communication problems, and patient characteristics are root causes found for long outpatient waiting time. All studies revealed a reduction in outpatient waiting time (5.2% to 97%) after implementation of LSS. Process redesign, improvement in appointment scheduling, patient communication, and improvement in workplace design, were strategies used to reduce outpatient waiting time. These strategies increase the number of patients seen and hospital gross revenue, as well as patient satisfaction.
Conclusion: LSS is beneficial to reduce outpatient waiting time. Process redesign provide advantageous results.
Keywords: hospital, lean six sigma, outpatient waiting time, process redesign
Al-Zain, Y. et al. (2019) ‘Implementing Lean Six Sigma in a Kuwaiti private hospital', International Journal of Health Care Quality Assurance, 32(2), pp. 431–446. Available at: http://dx.doi.org/10.1108/IJHCQA-04-2018-0099.
Bevan, H. et al. (2005) ‘Improvement Lean Six Sigma: some basic concepts Introduction', Innovation, pp. 1–15.
Bhaskar, H.L. (2020) ‘Lean Six Sigma in Manufacturing: A Comprehensive Review', in Márquez FP (ed.) Lean Manufacturing and Six Sigma - Behind The Mask, p. 1093.
Bhat, S. and Jnanesh, N.A. (2014) ‘Application of Lean Six Sigma methodology to reduce the cycle time of out-patient department service in a rural hospital', International Journal of Healthcare Technology and Management, 14(3), pp. 222–237. Available at: https://doi.org/10.1504/IJHTM.2014.064257.
Ciulla, T.A. et al. (2018) ‘Lean six sigma techniques to improve ophthalmology clinic efficiency', Retina, 38(9), pp. 1688–1698. Available at: https://doi.org/10.1097/IAE.0000000000001761.
Dubey, S. et al. (2016) ‘Using lean six sigma to improve throughput efficiency at tertiary care eye hospital', Current Indian Eye Research Indian Eye Research, 3(2), pp. 79–83.
Furterer, S.L. (2014) Lean six sigma case studies in the healthcare enterprise, Lean Six Sigma Case Studies in the Healthcare Enterprise. Available at: https://doi.org/10.1007/978-1-4471-5583-6.
Gavriloff, C., Ostrowski-Delahanty, S. and Oldfield, K. (2017) ‘The Impact of Lean Six Sigma Methodology on Patient Scheduling', Nursing Economics, 35(4), pp. 189–193.
Gijo, E. V and Antony, J. (2014) ‘Reducing Patient Waiting Time in Outpatient Department Using Lean Six Sigma Methodology', Quality and Reliability Engineering International, 30(8), pp. 1481–1491. Available at: https://doi.org/10.1002/qre.1552.
Henrique, D.B. and Godinho Filho, M. (2020) ‘A systematic literature review of empirical research in Lean and Six Sigma in healthcare', Total Quality Management and Business Excellence, 31(3–4), pp. 429–449. Available at: https://doi.org/10.1080/14783363.2018.1429259.
Honda, A.C. et al. (2018) ‘How Lean Six Sigma Principles Improve Hospital Performance', The Quality Management Journal, 25(2), pp. 70–82. Available at: http://dx.doi.org/10.1080/10686967.2018.1436349.
Hu, L. et al. (2019) ‘How Perceived Quality of Care Affects Outpatient Satisfaction in China: A Cross-Sectional Study of 136 Tertiary Hospitals', Inquiry (United States), 56. Available at: https://doi.org/10.1177/0046958019895397.
Jayasinha, Y. (2016) ‘Decreasing Turnaround Time and Increasing Patient Satisfaction in a Safety Net Hospital – Based Pediatrics Clinic Using Lean Six', 25(1), pp. 38–43. Available at: https://doi.org/10.1097/QMH.0000000000000083.
Kam, A.W. et al. (2021) ‘Using Lean Six Sigma techniques to improve efficiency in outpatient ophthalmology clinics', BMC Health Services Research, 21, pp. 1–9. Available at: http://dx.doi.org/10.1186/s12913-020-06034-3.
Lin, S.Y. et al. (2013) ‘Use of lean sigma principles in a tertiary care otolaryngology clinic to improve efficiency', Laryngoscope, 123(11), pp. 2643–2648. Available at: https://doi.org/10.1002/lary.24110.
Naiker, U. et al. (2018) ‘Time to wait : a systematic review of strategies that affect out-patient waiting times', pp. 286–293.
Ninerola, A., Sánchez-Rebull, M. and Hernández-Lara, A. (2020) ‘Quality improvement in healthcare : Six Sigma systematic review', 124, pp. 438–445. Available at: https://doi.org/10.1016/j.healthpol.2020.01.002.
Osundina, K.S. and Opeke, R.O. (2017) ‘Patients' Waiting Time: Indices for Measuring Hospital Effectiveness', 3(10), pp. 1–18.
Page, M.J. et al. (2021) ‘The PRISMA 2020 statement: An updated guideline for reporting systematic reviews', The BMJ, 372. Available at: https://doi.org/10.1136/bmj.n71.
Peimbert-garcía, R.E. et al. (2020) ‘Systematic Review of Literature on Lean and Six Sigma in Healthcare and Directions for Future Research', pp. 80–91.
Sterne, J.A. et al. (2016) ‘ROBINS-I: A tool for assessing risk of bias in non-randomised studies of interventions', BMJ (Online), 355, pp. 4–10. Available at: https://doi.org/10.1136/bmj.i4919.
Tlapa, D. et al. (2019) ‘Effects of Lean Healthcare on Patient Flow: A Systematic Review', Value in Health, 23(2), pp. 260–273. Available at: https://doi.org/10.1016/j.jval.2019.11.002.
Verver, J.P.S. et al. (2006) ‘Lean Six Sigma in Healthcare', (October 2017), pp. 3–11. Available at: https://doi.org/10.1111/j.1945-1474.2006.tb00596.x.
Zimmermann, G. dos S., Siqueira, L.D. and Bohomol, E. (2020) ‘Lean Six Sigma methodology application in health care settings : an integrative review', 73(Suppl 5), pp. 1–9.
Copyright (c) 2023 Elina Waiman, Anhari Achadi, Renita Agustina
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
1. As an author you (or your employer or institution) may do the following:
- make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use;
- make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g. via an e-mail list or list server);
- present the article at a meeting or conference and to distribute copies of the article to the delegates attending such meeting;
- for your employer, if the article is a ‘work for hire', made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g. training);
- retain patent and trademark rights and rights to any process, procedure, or article of manufacture described in the article;
- include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially);
- use the article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of the article in the journal); and prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal;
- may reproduce or authorize others to reproduce the article, material extracted from the article, or derivative works for the author's personal use or for company use, provided that the source and the copyright notice are indicated.
All copies, print or electronic, or other use of the paper or article must include the appropriate bibliographic citation for the article's publication in the journal.
2. Requests from third parties
Although authors are permitted to re-use all or portions of the article in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
3. Author Online Use
- Personal Servers. Authors and/or their employers shall have the right to post the accepted version of articles pre-print version of the article, or revised personal version of the final text of the article (to reflect changes made in the peer review and editing process) on their own personal servers or the servers of their institutions or employers without permission from JAKI;
- Classroom or Internal Training Use. An author is expressly permitted to post any portion of the accepted version of his/her own articles on the author's personal web site or the servers of the author's institution or company in connection with the author's teaching, training, or work responsibilities, provided that the appropriate copyright, credit, and reuse notices appear prominently with the posted material. Examples of permitted uses are lecture materials, course packs, e-reserves, conference presentations, or in-house training courses;
