Observation of Sort, Set, Shine, Standardize, and Sustain in a Manufacturing Company Surabaya
Downloads
Introduction: The implementation of the Occupational Health and Safety system in industry aims to create a workplace that is safe, healthy, and free from environmental pollution so that it minimizes the probability of occupational accidents and illness. The arrangement of goods and comfortable work environment can affect labour productivity. Creating an orderly and comfortable working environment can be manifested in a good Sort, Set, Shine, Standardize (5S) application. The purpose of this study is to describe the implementation of the 5S program in PT Albea Rigid and Packaging Surabaya. Method: This research was a descriptive qualitative research. The data used in this study were secondary data which were obtained from the EHS Department of PT. Albea Rigid Packaging Surabaya which were later analyzed using several theoretical references. Variables in this research were observation of Sort, observation of Set, observation of Shine, observation of Standardize and observation of Sustain. The analyzed data were further interpreted and presented in a narrative form. Results: The results show that the implementation of 5S in the Injection Molding Production area of PT. Albea Rigid Packaging Surabaya, before the socialization, had a score of 16 points and after the socialization it increased to 40 points. Even though the score has increased, the implementation of the 5S was still not running optimally. Conclusion: The principle of Standardize still had the same score before and after the socialization, while for the other 3 principles, namely Sort, Set and Shine, there was an increase in points after the socialization.
Agrahari, R. S., Dangle, P. A. and Chandratre, K. V (2015) ‘Implementation Of 5S Methodology In The Small Scale Industry A Case Study', International Journal of Scientific & Technology Research, 4(4), pp. 180–187.
Ashraf, S. R. Bin, Rashid, M. M. and Rashid, D. A. R. M. H. (2017) ‘Implementation of 5S Methodology in a Food & Beverage Industry: A Case Study', International Research Journal of Engineering and Technology, 4(3), pp. 1791–1796.
Chourasia, R. and Nema, A. (2016) ‘Review on Implementation of 5S methodology in the Services Sector', International Research Journal of Engineering and Technology (IRJET), 3(4), pp. 1245–1249.
Christian, R. S. (2018) ‘Penerapan Evaluasi Ringkas, Rapi, Resik, Rawat, Rajin Pt. Inka (Persero) Madiun', The Indonesian Journal of Occupational Safety and Health, 7(1), pp. 11–19.
Daraei, R. M. et al. (2015) ‘Identifying and Ranking the Critical Success Factors Affecting Implementation of 5S', American Journal of Service Science and Management, 2(6), pp. 67–73.
Hazmi, F. W., Karningsih, P. D. and Supriyanto, H. (2012) ‘Penerapan Lean Manufacturing Untuk Mereduksi waste di PT ARISU', Jurnal Teknik ITS, 1(1), pp. 135–140.
Houa, S. C. et al. (2018) ‘Implementation of 5S in Manufacturing Industry: A Case of Foreign Workers in Melaka', MATEC Web of Conferences, 150, pp. 1–5.
Hudori, M. and Simanjuntak, J. M. (2017) ‘Poka Yoke untuk Pembuatan Palet Package Information di Bagian Shipping', Industrial Engineering Journal, 6(1), pp. 16–21.
Jerik, F. and Prasetyo, W. (2019) ‘Penerapan Dan Efektifitas 5s Di Perusahaan Retail Makanan', G-Tech: Jurnal Teknologi Terapan, 3(1), pp. 198-201.
Jiménez, M. et al. (2015) ‘5S methodology implementation in the laboratories of an industrial engineering university school', Safety Science, 78, pp. 163–172.
Kendangamuwa, K. W. C. U. K. et al. (2015) ‘Factors Contributing To The Sustainability Of 5S Programmes In Government Hospitals In Regional Director Of Health Services Area Kurunegala', International Journal of Scientific & Technology Research, 4(3), pp. 83–87.
Ministry of Manpower (2018) Permenaker Nomor 5 Tahun 2018 Tentang Keselamatan Dan Kesehatan Kerja. Jakarta: Ministry of Manpower. (no date).
Mohan Sharma, K. and Lata, S. (2018) ‘Effectuation of Lean Tool "5S” on Materials and Work Space Efficiency in a Copper Wire Drawing Micro-Scale Industry in India', Materials Today: Proceedings, 5(2), pp. 4678–4683.
Mubarok, R. (2018) Pelaksanaan Ringkas, Rapi, Resik, Rawat, Rajin (5R) Bengkel Teknik Kendaraan Ringan SMK Muhammadiyah Pakem Dalam Mewujudkan Sekolah Berbasis Industri. Undergraduate Thesis. Yogyakarya: Faculty of Engineering Universitas Muhammadiyah Yogyakarta.
Nusannas, I. S. (2016) ‘Implementasi Konsep Budaya 5R ( Ringkas , Rapi , Resik , Rawat Dan Rajin )', Jurnal Ekonomi dan Bisnis, 4(1), pp. 93–106.
Osada, T. (2014) Sikap Kerja 5R. Jakarta: Ppm.
Pallawi, S. (2018) ‘Impact Of 5s Methodology On The Efficiency Of The Workplace: Study Of Manufacturing Firms', International Journal of Research in Commerce & Management, 9(December), p. 14016.
Rochmanto, D. P. (2015) Penerapan Ringkas, Rapi, Resik, Rawat Dan Rajin (5R) Dalam Upaya Pengendalian Kebakaran Di Unit Produksi 2 PT. Kutai Timber Indonesia (KTI). Undergraduate Thesis. Jember: Faculty of Public Health Universitas Jember.
Setyanto, G. E. (2015) ‘Analisis Kebijakan Perusahaan Dan Partisipasi Tenaga Kerja Pada Bagian Produksi Terhadap Penerapan 5R PT. Maritim Barito Perkasa', The Indonesian Journal of Occupational Safety and Health, 4(1), pp. 74–82.
Singh, S. et al. (2015) ‘Identification of Factors which are Affecting for Effective Implementation of 5S Technique in SMEs of Vadodara Region', International Journal on Theoritical and Applied Research in Mechanical Engineering, 4(3), pp. 29–33.
Siska, M. and Sari, L. F. (2016) ‘Analisis Prinsip Kerja 5S dan Motivasi Karyawan di PT. Jasa Barutama Perkasa Pekanbaru Riau', Jurnal Sains, Teknologi Industri, 14(1), pp. 57–65.
Suma'mur (2013) Higiene Perusahaan Dan Kesehatan Kerja (Hiperkes). Jakarta: Sagung Seto.
Thapa, H. L., Gupta, A. K. and Qureshi, I. (2020) ‘Implementation of 5S System in the Small & Medium Scale Industry', International journal of Research science and Management, 7(7), pp. 23–27.
Veres, C. et al. (2018) ‘Case Study Concerning 5S Method Impact in an Automotive Company', Procedia Manufacturing, 22, pp. 900–905.
Yenita, R. N. (2017) Higine Industri. Edisi 1 Cetakan 1. Yogyakarta: Deepublish.
Copyright (c) 2022 The Indonesian Journal Of Occupational Safety and Health
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
In order to be accepted and published by The Indonesian Journal of Occupational Safety and Health, Author(s) who submit an article should complete all the review process. The copyright of received articles assigned to the The Indonesian Journal of Occupational Safety and Health and Department of Safety and Health, Universitas Airlangga as publishers of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
The Editorial Team of The Indonesian Journal Of Occupational Safety and Health and Department of Safety and Health strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Users of this website will be licensed to use materials from this website following the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. No fees charged. Please use the materials accordingly.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Attribution ” You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial ” You may not use the material for commercial purposes.
ShareAlike ” If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
How to Submit Articles in OJS
