HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) PADA PROSES FABRIKASI PLATE TANKI 42-T-501A PT PERTAMINA (PERSERO) RU VI BALONGAN
Downloads
HIRA is a process to identify all risk factor in a company then attempt to quantify the risk and determine whether it is acceptable or not. This study aimed to identify and assess occupational risk in the fabrication plate process, tank 42-T-501A, at PT Pertamina (Persero) RU VI Balongan. It is an observational and a cross-sectional study based on research time. The object of this study focuses on PT Pertamina (Persero) RU VI Balongan's fabrication plate, tank 42-T-501A, workers with a total population of 20 people plus 1 safety inspector. Primary data obtained through observations and interviews which afterward presented in the form of tables and diagrams to be analyzed descriptively. The result showed that there were 6 procedures with 24 potential hazards and 24 occupational risks in the fabrication process tank 42-T- 501A. Based on the result of risk assessment, there are 6 low risk hazards, 6 medium risk hazards, 11 high risk hazards, and 1 extreme risk hazard from the total of 24 hazards in the fabrication plate process tank 42-T-501A. Finally, this study concludes that the dominant risk in the fabrication plate process tank 42-T-501A is high risk (45%). Examples founded in high risk category are stricken by plate, light exposure of torch, fume exposure of torch, sparks of cutting torch, light exposure of welding, fume exposure of welding, sparks of welding, explosions of sandblasting tube and explosions of sandblasting hose.
Keywords: hazard identification, risk assessment, fabrication plate
Ambarani, A. Y. 2016. Analisis Risiko Pada Proses Overhaul Tanko di PT Pertamina (Persero) Refinery Unit VI Balongan Jawa Barat. Skripsi. Surabaya; Universitas Airlangga.
Andhini D. P., Sugiono., Remba Y.E. 2015. Implementation of Job Safety Analysis (JSA) in Prevention Work Accident (Case Study: PT. Adi Putro Wirasejati). Jurnal Rekayasa dan Manajemen Sistem Industri, Vol. 3, No. 2: 386–396.
Baihaqi, R. 2014. Data Kecelakaan 2013. MenurutJamsostek.http://ekbis.sindonews.com/ read/836859/34/192-911-peserta-jamsostek- alami-kecelakaan-kerja-1392713047 [22
November 2015]
Daryanto. 2012. Teknik Las. Alfabeta,cv. Bandung. Diemas. 2015. Kecelakaan Overhaul Tanki PT Pertamina Cilacap. http://www.cnnindonesia. com/ekonomi/20150501193707-85-50581/1- orang-tewas-dalam-insiden-kerja-di-kilang- pertamina/ [22 November 2015]
Dwi S.B., M. Sulaksmono. 2013. Risk Assessment Pada Pekerjaan Welding Confined Space di Bagian Ship Building PT Dok dan Perkapalan Surabaya. The Indonesian Journal of Occupational Safety and Health, Vol. 2, No. 1 Jan–Jun 2013: 52–60.
Fitriana, R. 2012. Kajian Risiko Keselamatan Kerja Pada Proses Overhaul Tanki Timbun L3 di PT. Pertamina (Persero) RU III Plaju – Sungai Gerong Palembang Tahun 2011. Skripsi. Jakarta; Universitas Indonesia: 3–34.
Heinrich H.W Industrial Accident Prevention. New York: McGraw-Hill Book Company, 1980.
Kementerian Energi dan Sumber Daya Mineral.2012. Kajian Supply Demand Energy. [online] Dari:http://prokum.esdm.go.id/Publikasi/Hasil%20Kajian/ESDM%20SDE.pdf [22 November 2015]
Modul Sertifiksi SI, GSI & AT PT. PERTAMINA PERSERO tentang Identifikasi Bahaya, HSE Corporate. 2010. Occupational Health & Safety Standard 18001 Tahun 2007 tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja – Persyaratan.
PT Jamsostek (Persero). 2012. Himpunan Peraturan Perundangan Pemerintah Republik Indonesia Mengenai Jaminan Sosial Tenaga Kerja : Jakarta.
PT. Pertamina. 2012. Unit Refinery. http://www. pertamina.com/en/our-business/downstream/ refinery/ [22 November 2015]
Ramli, S. 2011. Pedoman Praktis Manajemen Risiko Dalam Perspektif K3 OHS Risk Management. Jakarta: Dian Rakyat.
Saloni Waruwu dan Ferida Yuamita. 2016. Analisis Faktor Kesehatan dan Keselamatan Kerja (K3) yang Signifikan Memengaruhi Kecelakaan Kerja
Pada Proyek Pembangunan Apartemen Student Castle. Jurnal Spektrum Industri, Vol. 14, No. 1: 1–108.
Siswanto, A. 1994. Bahaya Proses Pengelasan. Surabaya: 2–38. (sitasi tanggal 3 November 2014)
SKK MIGAS. 2014. Sustainability Reporting. [online] Dari: http://www.skkmigas.go.id/wp- content/uploads/2014/12/SUSTAINABILITY- REPORTING-G4.pdf [22 November 2015]
Supriyadi, A. 2014. Data Kecelakaan 2012 MenurutJamsostek. http://katigaku. com/2014/08/24/infografik-data-dan-fakta- keselamatan-dan-kesehatan-kerja-di-indonesia/ [22 November 2015] TKO HIRADC PERTAMINA SAFETY – HSE RU VI Tahun 2016.
Tualeka, A. R. 2013. Analisis Risiko. Surabaya: Graha Ilmu Mulia.
In order to be accepted and published by The Indonesian Journal of Occupational Safety and Health, Author(s) who submit an article should complete all the review process. The copyright of received articles assigned to the The Indonesian Journal of Occupational Safety and Health and Department of Safety and Health, Universitas Airlangga as publishers of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
The Editorial Team of The Indonesian Journal Of Occupational Safety and Health and Department of Safety and Health strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Users of this website will be licensed to use materials from this website following the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. No fees charged. Please use the materials accordingly.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Attribution ” You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial ” You may not use the material for commercial purposes.
ShareAlike ” If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
How to Submit Articles in OJS
