RISK ASSESSMENT WORK OF GRINDING IN UNIT FABRICATION PT. OMETRACO ARYA SAMANTA SURABAYA
Downloads
Fabrication Unit is a work area which there are processes of production activities of various kinds of work. Many types of work carried out in fabrication unit have risk that can lead to accidents. One of the types job in fabrication unit is grinding. Process in grinding can not be separated from potential hazards and risks that must be controlled to minimize the occurrence of accidents. This study intend to assess the risk on grinding in fabrication unit of PT. Ometraco Arya Samnta Surabaya. This was an observational descriptive study with cross-sectional design. Primary data obtained through interviews and observations whereas secondaray data collected from the company. Based on the result of the study, there were 21 hazards in grinding job that can be classified into 13 low risks, 5 medium risks, and 3 high risks. The high risks were the wheel rotation of grinding machine, grinding sparks, and falling material.
Keywords: grinding, hazard identification, risk assessmentAhmad, Z., 2012. Hubungan Heat Stress dengan Kelelahan pada Mahasiswa Semester I Fakultas Kedokteran Universitas Udayana. Jurnal ISM, 2(No.1 Januari-April), pp.22–25. https://doi.org/10.15562/ism.v2i1.79
Ambarani, AY., T.A., 2016. Hazard Identification and Risk Assessment (HIRA) pada Proses Fabrikasi Plate Tangki 42-T-501A PT. Pertamina (Persero) RU VI Balongan. The Indonesian Journal of
Ocupational Safety and Helath, 5(2), pp.192–20. https://doi.org/10.20473/ijosh.v5i2.2016.192-203
Dankis., M., 2015. Risk Assessment Perusahaan Export Sepatu pada Bagian Line Upper PT.X. The Indonesian Journal of Ocupational Safety and Health, 4(1), pp.22–23. https://doi.org/10.20473/ijosh.v4i1.2015.22-32
International Labour Organizatio., 2013. Keselamatan dan Kesehatan Kerja Sarana untuk Produktivitas. 1st Ed. [e-book]. Jakarta: ILO.
Pratama, Z., 2013. Risk Management pada Pekerjaan oxy-LPG Material Cutting di Area Workshop PT. Bangun Sarana Baja Gresik. Skripsi. Universitas Airlangga.
Ramli, S., 2010. Pedoman Praktis Manajemen Risiko dalam Prespektif K3 OHS Risk Management. Jakarta: Dian Rakyat.
Rochmawati, I.A., 2013. Identifikasi Potensi Bahaya dan Penilaian Risiko pada pekerjan Penggerindaan di Unit Fabrikasi PT. Lintech Duta Pratama Surabaya. Skripsi. Universitas Airlangga.
Roy, R., 2018. Kebutuhan Baja Nasional 2018 Capai 14 Juta. CNBC Indonesia.
Suma'mur., 2009. Higiene Perusahaan dan Kesehatan Kerja (HIPERKES). Jakarta: Sagung Seto.
Tualeka, A.R., 2013. Analisis Risiko. Surabaya: Graha Ilmu Mulia.
Undang-Undang Nomor 18 Tahun 1999 Tentang Jasa Konstruksi. Jakarta: Hukum Online
- The authors agree to transfer the transfer copyright of the article to The Indonesian Journal of Public Health effective if and when the paper is accepted for publication.
- Authors and other parties are bound to the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License for the published articles, legal formal aspect of journal publication accessibility refers to Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA), implies that:
- Attribution ” You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial ” You may not use the material for commercial purposes.
- ShareAlike ” If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
