Main Article Content

Abstract

A safety sign is a sign of equipment to provide protection for workers or visitors in the workplace. American National Standards Institute Z535 (ANSI Z535) is used as a basic guideline for installing safety signs in the workplace because it is more communicative by using global symbols to overcome language barriers. Occupational Safety Division of Manpower and Transmigration Departement, East Java Province (UPT Keselamatan Kerja Surabaya) is a workplace that has a risk of occupational accidents. The preliminary surveys in the area of the 3rd floor of the Division of Occupational Safety (UPT Keselamatan Kerja) Surabaya revealed that there were many sites with insufficient safety signboards. Many of the installed safety signs did not comply with ANZI Z535 standards. This study aimed to evaluate the installation of safety signs compared to the ANZI Z535 standard on the 3rd floor of UPT K2 Surabaya. This was an observational study examining the installation of safety signs. The data were obtained using the ANSI Z535 safety sign checklist. We found 2 out of 5 types of safety signs were in accordance with ANSI safety sign standards with a comparison percentage of more than 66%, such as the notice sign (67.85%) and safety condition sign (75%). Three other types of safety signs were in the unfavorable category with a percentage of less than 66%, such as danger sign (65.63%), warning sign (50%), and caution sign (46.88%). Some sites required additional safety signs, such as warning signs (at distillation site), caution signs (oven, stairs), notice signs (cylinder storage, elevator, chemical warehouse), and safety condition signs (stair, eyewash).

Keywords

Safety signboard ANSI Z535 standard laboratory public health

Article Details

How to Cite
Amaliyah, M., & Widajati, N. (2021). Evaluation of ANSI Z535 Safety Sign Installation. Folia Medica Indonesiana, 57(3), 231–238. https://doi.org/10.20473/fmi.v57i3.25293

References

  1. Abidin AU, Ramadhan I (2019). Penerapan job safety analysis, pengetahuan keselamatan dan kesehatan kerja terhadap kejadian kecelakaan kerja di laboratorium perguruan tinggi. Jurnal Berkala Kesehatan 5, 76-80.
  2. Anggowarsito JL (2014). Luka bakar sudut pandang dermatologi. Jurnal Widya Medika Surabaya 2, 113-120.
  3. Basuki M, Susanto RB, Herianto HP, et al (2015). Analisis Risiko Kegiatan Bongkar Muat Sebagai Komponen Dwelling Time Di Pelabuhan. 5, 511–518.
  4. Calatayud A, Ketterer JA (2016). Integrated value chain risk management. United States, Inter-American Development Bank.
  5. Clarion A (2013). New OSHA/ANSI safety sign systems for today's workplaces. Amerika Serikat, Clarion Safety Systems. Available from https://www.ishn.com/ext/resources/Resources/white-papers/Clarion_ISHN_Whitepaper.pdf. Accessed November 5, 2020.
  6. Dantjie PR, Widjasena B, Suroto S (2016). Perbedaan pengetahuan, sikap dan praktik keselamatan dan kesehatan kerja laboratorium antara mahasiswa program studi D3 dan S1 pada institusi pendidikan di Semarang. Jurnal Kesehatan Masyarakat 4, 97-107.
  7. Harjanto NT, Suliyanto S, Ismojowati ES (2011). Manajemen bahan kimia berbahaya dan beracun sebagai upaya keselamatan dan kesehatan kerja serta perlindungan lingkungan. PIN Pengelolaan Instalasi Nuklir IV, 54-67.
  8. Health and Safety Executive (2009). Safety signs and labels. Health and Safety Executive 94(2), 98.
  9. IAPA (2007). Safety signs and colour at work. Industrial Accident Prevention Association. http://www.iapa.ca. Accessed November 5, 2020.
  10. Jufriyah J, Mar'ah I, Isharyudono K (2019). Pemeliharaan dan penyimpanan peralatan laboratorium kimia. Jurnal Pengelolaan Laboratorium Pendidikan 1, 26-32.
  11. Kristiawan R, Abdullah R (2020). Faktor penyebab terjadinya kecelakaan kerja pada area penambangan batu kapur unit alat berat PT. Semen Padang. Jurnal Bina Tambang 5, 11-21.
  12. Kurniawan B, Ekawati E, Firdani L (2014). Analisis penerapan alat pemadam api ringan (Apar) di PT. X Pekalongan. Jurnal Kesehatan Masyarakat 2, 300-308.
  13. Latham G, Long T, Devitt P (2013). Children's misunderstandings of hazard warning signs in the new globally harmonized system for classification and labeling. Issues Compr Pediatr Nurs 36, 262-78.
  14. Purohit DP, Siddiqui NA, Nandan A, et al (2018). Hazard identification and risk assessment in construction industry. International Journal of Applied Engineering Research 13, 7639-7667.
  15. Solichin S, Endarto FEW, Ariwinanti D (2014). Penerapan personal protective equipment (alat pelindung diri) pada laboratorium pengelasan. Jurnal Teknik Mesin 22, 89-103.
  16. Suharto S (2016). Studi tentang keamanan dan keselamatan pengunjung hubungannya dengan citra destinasi (studi kasus Gembira Loka Zoo). Jurnal Media Wisata 14, 287-304.
  17. Suma'mur PK (2014). Higiene Perusahaan dan Kesehatan Kerja (HIPERKES). Jakarta, Gunung Agung.
  18. Suryanto S (2011). Ledakan di mabes polri kecelakaan kerja powered satu. https://www.antaranews.com/berita/244709/ledakan-di-mabes-polri-kecelakaan-kerja#mobile-nav. Accessed December 17, 2020.
  19. Wachter JK, Yorio PL (2014). A system of safety management practices and worker engagement for reducing and preventing accidents: An empirical and theoretical investigation. Accident Analysis & Prevention 68, 117-130.
  20. Wiratami R, Bhaskara GI (2018). Penerapan Keselamatan dan Kesehatan Kerja (K3) pada Atraksi Adventure Tourismdi Kawasan Air Terjun Aling-Aling Sambangan. Jurnal Destinasi Pariwisata 5, 287-293.