TRANSSHIPMENT DENGAN PROGRAM LINGO DALAM DISTRIBUSI PRODUK MULTIVITAMIN
Downloads
ABSTRAK
Masalah pendistribusian produk Camivita Syrup 60 mL terjadi mulai dari pendistribusian bahan kemasan innerbox dari beberapa vendor hingga perusahaan manufaktur yaitu PT Lucas Djaja, produk tersebut diproduksi sesuai dengan kapasitas produksi, kemudian produk didistribusikan dari produsen ke beberapa pusat distribusi. Perbedaan kapasitas dan biaya yang dikeluarkan untuk distribusi dari masing-masing vendor dan menuju setiap pusat distribusi menyebabkan perlunya strategi distribusi yang optimal dan untuk mendapatkan biaya distribusi yang minimal. Metode penelitian ini adalah metode penelitian kuantitatif yang bertujuan untuk merumuskan strategi optimal diperoleh dari masalah transshipment dengan aplikasi LINGO. Hasil pendistribusian barang yang optimal adalah jumlah suplai yang didapat dari CV. Maestro Print adalah 14.400 pcs innerbox, diproduksi oleh PT Lucas Djaja dengan 14.400 produk, dan didistribusikan ke Arta Anugrah Distrindo, Prima Anugrah Mandiri, dan Global Health Pharmaceuitical untuk 7.500, 900 dan 6.000 produk. Biaya yang dihasilkan dari alokasi distribusi tersebut sebesar Rp 1.487.700. Hasil tersebut masih bisa dioptimalkan lagi, karena kapasitas produksinya bisa mencapai 19.668 produk. Kegiatan peningkatan permintaan seperti perbaikan strategi pemasaran dapat dilakukan untuk mendapatkan hasil yang optimal.
Kata kunci: Transshipment, distribusi optimal, LINGO
ABSTRACT
The problem of distributing 60 mL Camivita Syrup products occurs from the distribution of innerbox packaging materials from several vendors to manufacturing companies, namely PT Lucas Djaja, these products are produced according to production capacity, then the products are distributed from producers to several distribution centers. The differences in capacity and costs incurred for distribution from each vendor and towards each distribution center lead to the need for an optimal distribution strategy and to obtain minimal distribution costs. This research method is a quantitative research method that aims to formulate the optimal strategy obtained from the transshipment problem with the LINGO application. The optimal distribution result is the amount of supply obtained from CV. Maestro Print is 14,400 pcs innerbox, produced by PT Lucas Djaja with 14,400 products, and distributed to Arta Anugrah Distrindo, Prima Anugrah Mandiri, and Global Health Pharmaceuitical for 7,500, 900 and 6,000 products. The cost resulting from the distribution allocation amounted to Rp 1,487,700. These results can be optimized again, because the production capacity can reach 19,668 products. Activities to increase demand such as improving marketing strategies can be carried out to obtain optimal results.
Keywords: Transshipment, optimal distribution, LINGO
Andriati, R. (2018). Penyelesaian Model Transshipment Dengan Metode Least Cost, North West Corner Dan Vogel's Approximation Method (Studi Kasus: Pt. Subur Bangun Transport) (Doctoral Dissertation, Universitas Islam Negeri Sultan Syarif Kasim Riau).
Atristyanti, I. G. (2017). Studi Penggunaan Packing Plant Pada Distribusi Semen Di Kalimantan Menggunakan Metode Transshipment: Studi Kasus Pt Semen Gresik. Jurnal Ekonomi, 20(2), 246-272.
Basriati, S., & Sukma, E. (2018). Aplikasi Model Goal Programming pada Pendistribusian Dana Bantuan Operasional Sekolah (BOS) di Kecamatan Tampan (Studi Kasus: Dinas Pendidikan Kota Pekanbaru). Jurnal Sains Matematika dan Statistika, 4(1), 55-63.
Dimyati, T., & Dimyati, A. (2004). Operation Research Model-model Pengambilan Keputusan. Bandung: Sinar Baru Algesindo.
Dwiyanto. (2011, Maret). Penyelesaian Transshipment dengan Lingo. (Wordpress) Retrieved Maret 11, 2020, from https://masdwijanto.files.wordpress.com/2011/03/bab-iv-_penugasan-dan-transshipment.pdf
Ekren, B., & Yetkin, B. (2019). Simulation-based lateral transshipment policy optimization for s, S inventory control problem in a single-echelon supply chain network. International Journal of Optimization and Control Theories, 9-16.
Ekren, B., & Yetkin, S. (2008). Simulation based optimization of multi-location transshipment problem with capacitated transportation. Winter Simulation Conference. IEEE.
Gani, A., R., N., & S., B. (2014). Improved vogel's approximation method to solve fuzzy transshipment problem. Intern. J. Fuzzy Mathematical Archive, 4.2, 80-87.
Krishnaraj, C., Jayakumar, A. A., & Shri, S. D. (2015). Solving Supply Chain Network Optimization Models Using LINGO. International Journal of Applied Engineering Research, 10(19), 14715-14718.
Li, Z., & Jiang, C. (2016). Study on the Transportation Problem of Petrol Secondary Distribution with Considering Shortage Cost. Open Journal of Modelling and Simulation, 4(2), 34-40.
Muhammad, C., Diwjanto, H., & Dwijanto, Z. (2013). Optimalisasi Model Transshipment Di Pt. Primatexco Menggunakan Program Solver. Unnes Journal Of Mathematics, 2.1.
Muhamad, G. N. (2020). Optimalisasi Biaya Distribusi Beras Subsidi Dengan Model Transshipment. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 6(1), 40-43.
Pratiwi, D., Zaenuri, & H. S., M. (2012). Optimalisasi Distribusi Gas Elpiji Menggunakan Metode Transportasi Dan Transshipment. Unnes Journal of Mathematics, 1.2.
Simanjorang, F., & Swandi, A. (2017). Optimalisasi Masalah Transshipment dengan Menggunakan Vogel Approximation Method pada Distribusi Plastik di PT. Sentosa Plastik Medan. KARISMATIKA: Kumpulan Artikel Ilmiah, Informatika, Statistik, Matematika Dan Aplikasi, 3.2.
Teknologi Industri UMI. (2017, Agustus). Aplikasi LINGO. Retrieved Maret 11, 2020, from https://www.eknologiindustriumi.ac.id/file/2017/08/MODUL-2-LINGO.pdf
UNY. (2018). Lumbung Pustaka Universitas Negeri Yogyakarta. (Universitas Negeri Yogyakarta) Retrieved Maret 10, 2020, from http://eprints.uny.ac.id/29353/2/BAB II.pdf
Wang, J. M., & Yan, G. H. (2007). Study On The Method For Regional Logistics Distribution Of Chain Enterprise [J]. Communications Standardization, 12.
Xu, B., Lin, B. L., & Ji, L. J. (2011). Research On Railway Empty Wagons Regulation By Appropriating Lingo based on vba [J]. Railway Computer Application, 1.
Yu, S. (2012). Supply Chain Distribution Network--Optimized Design Model and Its Solution Based on Time Constraints. In 2012 Second International Conference on Intelligent System Design and Engineering Application (pp. 941-945). IEEE.
1. Copyright of this journal is possession of Editorial Board and Journal Manager, by the knowledge of author, whilst the moral right of the publication belongs to the author.
2. Legal formal aspect of journal publication accessibility refers to Creative Commons Atribusi-Non Commercial-No ShareAlike (CC BY-NC-SA),implies that publication can be used for non-commercial purposes in its original form (cannot be modified).
3. Every publications are open access for educational purposes, research, and library. Other that the aims mentioned above, editorial board is not responsible for copyright violation.
AJIM by Unair is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
