THE INNOVATION MODEL OF TURBINE ENGINE COMPRESSOR TO SIMULATE THE PERFORMANCE IN OIL AND GAS INDUSTRY
Unduhan
ABSTRACT
In 1997s, East Kalimantan had several oil and gas fields that had reservoir pressure in the High-Pressure category. However, a few years later, the pressure continued to decrease until it reached Low Pressure, so the compressor is needed to produce high-pressure. In this study, an explanation of the process of making a turbine engine performance simulation model in 2019 is discussed and predicting turbine engine performance in the following years. This is important because the compressor is a vital tool in the oil and gas industry. Furthermore, it works continuously so that performance must be considered. In general, the simulation model equation consists of several parameters that exist in the Brayton cycle in the gas turbine in steady conditions. Simultaneous equation solving in simulation models using the Newton-Raphson method. The simulation results show that the performance of the Turbine Engine Compressor in 2019 has a net power of 20.58 MW with a cycle efficiency of 23.06%. This can be developed for plans for maintenance applications to improve efficiency changes.
Keywords: simulation, Newton -Raphson, gas turbine, pressure, compressor
ABSTRAK
Pada tahun 1997, Kalimantan Timur memiliki beberapa ladang minyak dan gas yang memiliki tekanan reservoir dalam kategori tekanan tinggi. namun beberapa tahun kemudian, tekanan terus menurun hingga mencapai tekanan rendah, sehingga kompresor diperlukan untuk menghasilkan tekanan tinggi. Dalam penelitian ini, dibahas tentang proses pembuatan model simulasi kinerja mesin turbin pada tahun 2019 dan memprediksi performa mesin turbin di tahun-tahun berikutnya. Hal ini penting karena kompresor adalah alat vital dalam industri minyak dan gas. dan itu bekerja terus menerus sehingga kinerja harus diperhatikan. Secara umum, persamaan model simulasi terdiri dari beberapa parameter yang ada dalam siklus brayton di turbin gas dalam kondisi stabil. Penyelesaian persamaan simultan dalam model simulasi menggunakan metode newton-raphson. Hasil simulasi menunjukkan bahwa kinerja kompresor mesin turbin pada 2019 memiliki daya bersih 20,58 mw dengan efisiensi siklus 23,06%. Penelitian ini dapat dikembangkan untuk rencana aplikasi pemeliharaan untuk meningkatkan perubahan efisiensi.
Kata kunci: simulasi, Newton-Raphson, turbin gas, tekanan, kompresor
Boyce, M. P. (2002). Gas Turbine Engineering Handbook Second Edition. Houston: Gulf Publishing Company.
Boyce, M. P. (2012). Gas Turbine Engineering Handbook fourth Edition. Oxford: Elsevier.
Chacartegui, R., Sanchez, D., Munoz, A., & Sanchez, T. (2011). Real time simulation of medium size gas turbine. Energy Convention and Management, 713-724.
Chapra, S. C., & Canale, R. P. (2010). Numerical Method for Engineers sixth edition. New York: McGraw-Hill.
Ciggaar, J. (2010). Training and Technical Resources Development Solar Turbine Titan 130 & Thermodyne. Solar Turbine International.
Electric, G. (2003). Instruction, Operation and Maintenance Manual LM 2500. Balikpapan: Nuovo Pignone.
Gaesang, D., & Aditia. (2018). Engine Replacement Report. Mechanic. Balikpapan: PT. Pertamina Hulu Mahakam.
Giampaolo, A. (2006). Gas Turbine Handbook Pronciple and Practice Third Edition. Lilburn: The Fairmont Press.
INDONESIE, T. E. (2007). Tunu Field Development Project Phase 11 N / EPSC 11+12. Balikpapan: TOTAL E&P INDONESIE.
Kalimattullah, A. N. (2019). Performansi Kompressor dengan Flowrate Gas Minimum pada Lapangan Tunu North - NPU PT. Pertamina Hulu Mahakam. Balikpapan: Universitas Balikpapan.
Mahmuddin. (2017). Studi Eksperimental Penurunan Tekanan Aliran Melewati Belokan Pipa Horizontal dengan Variasi Rasio R/D. Teknologi, 18, 45 - 52.
Mechanic Team. (2004). Gas Turbine GE LM 2500. Balikpapan: Total E&P Indonesie.
Oyedepo, S. (2014). Thermodynamic Analysis of a Gas Turbine Power Plant Modeled with Evaporative Cooler. International Journal of Thermodynamics (IJoT), 17(1), 14-20. doi:10.5541/ijot.480
Pathirathna, K. (2013). Gas Turbine Thermodynamic and Performance Analysis Methods Using Available Catalog Data. Gavle: University of Gavle.
Pignone, N. (2001). Instruction, Operation and Maintenance Manual Gas Turbine LM 2500. Florence: Nuovo Pignone.
Ramadhan, T. A. (2018). Efisiensi Turbin Gas sebelum dan sesudah overhaul combustion inspection di GTG Utility I PT. Petrokimia Gresik. Yogyakarta: Universitas Gadjah Mada.
Stoecker, W. F. (1989). Design of Thermal Systems third edition. Singapore: McGraw-Hili Book Co.
Team, M. (2009). 8000 hr preventive maintenance general electric turbine engine compressor. Balikpapan: TOTAL E&P INDONESIE.
TOTAL. (2002). Turbines. Balikpapan: Total E&P Indonesie.
Total Finaelf. (2002). Tunu Field Development Project Phase 8. Balikpapan: Total Finaelf E&P Indonesie.
Wahzudi, T., Ariestyanti, A. P., & Pramaeda, T. D. (2017). Makalah Metode Newton-Raphson. Yogyakarta: Universitas PGRI Yogyakarta.
1. Copyright of this journal is possession of Editorial Board and Journal Manager, by the knowledge of author, whilst the moral right of the publication belongs to the author.
2. Legal formal aspect of journal publication accessibility refers to Creative Commons Atribusi-Non Commercial-No ShareAlike (CC BY-NC-SA),implies that publication can be used for non-commercial purposes in its original form (cannot be modified).
3. Every publications are open access for educational purposes, research, and library. Other that the aims mentioned above, editorial board is not responsible for copyright violation.
AJIM by Unair is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.