RISK ASSESSMENT OF OVERHEAD CRANE (OHC) DOUBLE GIRDER OPERATION IN THE KAPAL NIAGA DIVISION IN PT PAL INDONESIA (PERSERO

Lenny Novita, Erwin Dyah Nawawinetu

= http://dx.doi.org/10.20473/jvhs.V2.I1.2018.1-7
Abstract views = 10 times | views = 3 times

Abstract


Background: PT PAL Indonesia (Persero) operates Overhead Crane Double Girder tool everyday. The operation of the device have some risk of material hazard, material pinched, material scratched, fracture and passed away. Purpose: The purpose of this research was to assess the level of risk of occupational injury on the operation of Overhead Crane Double Girder. Methods: This research was a descriptive observational one. This study focuses on the operation of Overhead Crane Double Girder in the Kapal Niaga division PT PAL Indonesia (Persero) which consist of the preparation and operation phase. Result: The initial risk level categorized as high-risk level of 44% and a moderate risk level of 56%. The most frequently prevention measure ware routine check, compliance of SOP and PPE usage on workers. Implementation of control efforts resulted in a moderate risk rate of 44% and a low risk level of 56%. Conclusion: Recommendation of control for PT PAL Indonesia (Persero) performs routine maintenance both on equipment and overhead crane function double girder, application and compliance of operating SOP, and operator must have driving license of overhead crane double girder and experience in the field, if applied properly then final risk level to be 100% low.

Keywords


Risk assessment; Overhead crane double girder; Level of risk

Full Text:

PDF

References


Bsi. 2016. BS OHSAS 18001:2007-Occupational Health and Safety Management – Requirement. Bsi Standarts Publication.

Hardiastuty, A., Anindita, G., Khairansyah, M., D. 2017. Identifikasi Bahaya dan Penentuan Kegiatan Perawatan pada Tower Crane 50T Menggunakan Metode RCM II (Studi Kasus Perusahaan Manufaktur Kapal). 1st Proceeding Conference On Safety Engineering and Its Application. Vol.1(1). Pp.379-383

Lestari, D., A. 2013. Penilaian Risiko pada Pengoperasian Overhead Crane (OHC) di Workshop Fabrikasi PT Bangun Sarana Baja Gresik. Skripsi. Fakultas Kesehatan Masyarakat Universetas Airlangga, Surabaya.

Makomulamin, M., Safitri, Q.E. 2017. Analisis Risiko pada Pekerjaan Konstruksi Menggunakan Tower Crane Proyek Gedung Kantor SKDP Pemerintahan Kota Pekanbaru oleh PT Waskita Karya. Jurnal Vol. 4 (1). Program Studi Sarjana Ilmu Kesehatan Masyarakat Stikes Hang Tuah, Pekanbaru.

Nelson. 2012. Pengaruh Pelatihan Kerja terhadap Kinerja Karyawan Bagian Bongkar Muat Barang di Terminal Peti Kemas Cabang Panjang. Jurnal Manajemen Bisnis Vol. 3(1). Fakultas Ekonomi Universitas Sang Bumi Ruwa Jurni, Bandar Lampung.

Peraturan Menteri Tenaga Kerja Republik Indonesia No: PER.05/MEN/1985 tentang Pesawat Angkat dan Angkut. Jakarta.

Peraturan Menteri Tenaga Kerja dan Transmigrasi Republik Indonesia No: PER.09/MEN/VII/2010 tentang Operator dan Petugas Pesawat Angkat dan Angkut. Jakarta.

Ramli, S. 2010. Pedoman Praktis Manajemen Risiko dalam Prespektif K3. Cetakan I. Jakarta: PT Dian Rakyat.

Suma’mur. 2014. Hygiene Perusahaan dan Kesehatan Kerja (Hiperkes). Edisi 2. Jakarta: Sagung Seto.

Tarwaka. 2008. Keselamatan dan Kesehatan Kerja. Manajemen Implementasi K3 di Tempat Kerja. Surakarta: Harapan Press.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Journal Of Vocational Health Studies

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

This Journal is Indexing by: 

 

 Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.